Name: hit anchor Material: carbon steel GBQ235(as ASTM1020 steel) nail material: ASTM1045 steel+heat treatment zinc plated Product Name:hit anchor Material:steel metal Good qualitySize:M6 M8 M10 M12 M16 M20(length from M6×45mm to M20×190mm)

Product Name:hit anchor

HIT ANCHOR is a fast & easy to use expansion anchor.NO precise hole depth is required and installation condition can be adjusted from pinand nut.NAIL made by high tensile material,ASTM1045# steel standard.shaft material is GBQ235(as ASTM1020# steel standard)surface: color zinc platedsome type material is stainless steel is accepted.(less than M12 SPEC)Your length of barrel is accepted(custom made length).

TYPE C-STEEL(carbon steel)
Order	Anchor	Outsize	Anchor	Thread	Drill	Pull Out Load
Code	Size	Dia	Length	Length	Dia.	(200kgf/cm²)kgs
645	M6X45	6	45	15	6.4	475
660	M6X60	6	60	20	6.4
850	M8X50	8	50	20	8.5	705
870	M8X70	8	70	25	8.5
1050	M10X50	10	50	20	10.5	870
1060	M10X60	10	60	25	10.5
1080	M10X80	10	80	25	10.5
1090	M10X90	10	90	30	10.5	1180
1010	M10X100	10	100	30	10.5
1012	M10X120	10	120	30	10.5
1260	M12X60	12	60	20	12.7	1460
1270	M12X70	12	70	25	12.7	1826
1290	M12X90	12	90	30	12.7
1210	M12X100	12	100	40	12.7
1212	M12X120	12	120	50	12.7
1610	M16X100	16	100	40	17.0	3215
1612	M16X120	16	120	40	17.0
1615	M16X150	16	150	50	17.0
2013	M20X130	20	130	50	21.5	4450
2015	M20X150	20	150	50	21.5
2019	M20X190	20	190	50	21.5

Some process step please check under picture:

1.Cutting steel rod

2.turning outer diameter

3.drill holes

4.milling groove

5.turning thread

6.Packing

sell metal hit anchor