Wireless GSM + PSTN Alarm Control Panel Touch Keypad PE-4203
Features:
1. Speech indication for all operation steps, English LCD screen
2. Enable to set Tel-line on / off status monitoring / turn to use GSM transmit alarm automatically
3. Built-in GSM module, supports call or send out SMS message to mobile phone when alarm had been triggered
4. Built-in door bell tone
5. Built-in high tone loudspeaker
6. Wireless frequency 433MHz/868MHz
7. Supports dual-way communication, enable connect 8 wireless remote and 8 electronic switch, 1 wireless doorbell and unlimited for quantity of one way wireless siren.
8. Remote control via phone / voice alarm / 10 seconds for live listen and recording
9. Wireless device status inspection / wireless alarm linkage
10. Programmable 8 wired zones / 32 wireless zones
12. 2 alarm center phone number (CMS number) / 4 voice numbers / contact ID protocol
13. Supports GSM module optional SMS alarm / arm / disarm / control electronic appliance
14. Supports CID protocol upload / supports 4,6 or 8 digit user ID code
15. 4 group timing arm / disarm setting / remotely arm / disarm / live listen function
16. Arm / disarm status resume after power off
17. 120 alarm log and inquiry / 10 seconds for recording
18. Communication protocol to alarm center - Ademco / Contact ID
19. Inspections wireless device lose or low battery
20. Built-in rechargeable battery 11.1V /1000mA up to 8 hours when power off
21. Included 15V/2000mA external power adapter
Wireless GSM + PSTN Alarm Control Panel Touch Keypad