YT931 Silicone Sealant for Big Glass is one-component acid cure, use to structural glazing in big glass, etc.

YT931 Silicone Sealant for Big Glass

1.Characteristics:

YT931 belongs to RTV-1 product  Acetoxy cure, high tensile strength, fast curing.no change of color;

Excellent adhesion to glass and ceramics;

Excellent resistance to weather.                  

Excellent resistance to low and high temperature.  Little change in physical properties between -40~150.

2.Purpose:

Glazing;

Sealing in glass joints;

For structural glazing in big glass and glass roof  structural engineering.

3.Typical Technology Data

No.	Performance			Standard	Measured value	Single Evaluate
1	Appearance			Fine and uniform ointment, it shall not have block gel, surface coagulation and educt that cannot disperse quickly.	Conform standard	Qualified
2	Slumpability (mm)	Vertical,(mm)		≤3	0	Qualified
		Horizontal		Non distorted	Non distorted
4	Extrusion, (ml/min)			≤10	1.6	Qualified
3	Tack-Free Time (h)			≤3	0.5	Qualified
	Hardness (HsA)			20 ~ 60	29	Qualified
5	Tensile strength in adhesion Standard conaition		Tensile strength inadhesion(Mpa)	≥0.345	0.652	Qualified
	88 Tensile strength in adhesion		Tensile strength inadhesion(Mpa)	≥0.345	0.642	Qualified
	-29 Tensile strength in adhesion		Tensile strength inadhesion(Mpa)	≥0.345	0.638	Qualified /
	Adhesion of immersion in water		Tensile strength inadhesion(Mpa)		0.708
6	Loss of Heating, %			≤10	3.9	Qualified
Stability	Store for 12 months at -20 ~ 27 in cool, dry places after date of delivery.

4.Restriction of Usage:

Unsuitable for SSG system;

Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant;

Unsuitable for the frosty or moist surface;

Unsuitable for the continually soggy or moist place;

Unsuitable for metal and coated glass;

Cannot be used the product if the temperature is below 4or above 40 on the surface of the materials.

5.Technical Service:

Offer the integral technical data of the products.

Adhesion Test:

The products of YuanTong silicone sealant have excellent adhesion to most common building materials, as glassanodized aluminum ceramictile  granitebrickwood steel and most plastics. But we cannot ensure our sealants are suitable to all materials, as a result of the unceasing appearance of new building materials and the application of new surface treatment technology. In some cases, it is required to have the adhesion test on the substrates. In the laboratory of our company, we can carry out the adhesion test for clients and submit the test report that includes experimental result, recommended products, cleaning methods of the material surface etc.

Compatibility Test:

If the accessory materials like baker, double-sided glue strip can not be compatible with silicone rubber, it may cause silicone rubber to turn colors, even lose adhesion. To avoid these problems, we provide services of compatibility test for clients. Clients can send the accessory materials to us by mail (or other ways),then we will carry out the compatibility test and submit the test report.

Staining Test:

We provide services of pollution test for clients. Clients can send the substrates to us by mail (or other ways), then we will carry out the staining test and submit the  test report.

YT931 Silicone Sealant for Big Glass