Ads by Google
Production photo
Function:1. Single/double walkway---controlled in one direction or both
2. A valid lock action can allow one passage at one time Normally open---the machine will unlock when a valid signal is received
3. It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change.
4.All the system runs stable with little noise and no mechanical impactstandard port-RS485
5.Control panel with count and LED digital function
6.Traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
7.situations where need single-direction control such as market club film theatre gymnasium subway airport customs and etc. It can be divided into Vertical
8.Emergency configuration: The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency.
All turnstile models are space efficient security barriers, with a compact design, yet offer sufficient space to integrate any access control system. They can be mounted with display, passage counter, card reader, token operation, traffic lights, command console, alarm system against unauthorised entries, interfaced with a PC through a RS232 line. The unique dropping arm feature provides a fail-safe safety solution in case of an emergency or power failure, providing egress in case of crisis evacuations. Durability with minimal maintenance means years and millions of trouble free passages. The turnstile creates a secure environment in, for example, a reception area. Our turnstiles are used in applications including stadiums and arenas, perimeter and interior security, recreation and amusement parks, retail crowd control, transit fare collection and lobby access control.
Notes
Before starting installation, you must pay attention to those notes
1.Before starting installation and operation or maintenance ,cut off power supply.
2.The product must be earthed,and an earth leakeage breaker is necessary on the power supply.
3.As for electric cable type and section,we suggest to use the cable type of (HAR) with minimum section of 2.0 mm2
4.Do not change the original inside wiring
5.Keep the automatic control (push-button ,remote control , ect) out of the reach of children . The control system must be installed at a minimum height of 1.5 mm the grond surface.
6.Never open the door or the cover of the cabinet when the machine is working .
7.Do not permit children to play on or around a turnstile .If child want to go through the turnstile, the parents must look after them.
Technical parameter:
1.Frame :304 Stainless steel
2.Dimension:90°/120°
3.Size:1500(W)*1630(L)*2310(H)mm(Size can be customized )
4.Drive: Manually operation
5.Rotation Direction : A. Bi-Directional B. Unidirectional
6.Controller:Adopt micro-computer controller can be 7.programmed according to customer needs
7.Interface: Standard input and output interfaces can be used for other integration systems
8.Signal Source: A. Dry contact B. High-low-level signals
9.Roller working Power: AC220V±10%
10.Power Supply: AC220V±10% DC24V3A±10% DC12V3A±10%
11.Environment: Indoor/Out door Temperature:-30°C -- 80°C Humidity :5% --- 95%
12.Switching Time: 1s
13.Traffic Speed: 30 person per Minute
14.Fault Status: power-off and Giving a free exit/entry path
15.Movement failure rate: 500 million trouble-free
16.Frame Protection: Waterproof Seal
17.Card Reader Location: 4
18.Installation and maintenance Access: 1
19.Optional Feature:IC/ID reader , Barcode Reader ,other R/W equipment, UPS, Infrared detector
Testing
1). Check the wiring
When connected power debugging, please check the wiring diagram according to each parts of the line is connected.
Note: protective earth wire of equipment must reliable grounding, otherwise don't allow debugging.
2). Function test
(1) Turnstile actually pick two way signal (come in and out ).
(2) if the installation has LED indicator light on the surface, if the control PCB board receive the legitimate signal , turnstile will have green arrows in the direction.
Package and Delivery
Warnings
Before starting installation, you must pay attention to those notes:
1.Before starting installation and operation or maintenance, cut off power supply.
2.The product must be earthed, and an earth leakage breaker is necessary on the power supply.
3.Do not change the original inside wiring.
4.Keep the automatic control (push-button , remote control , etc) out of the reach of children .The control system must be installed at a minimum height of 1.5mm the ground surface.
5.Never open the door or the cover of the cabinet when the machine is working .
Maintance
1.It is forbidden for those non-specialists to open the cabinet to carry out adjustment, maintenance and service of the product.
2.The housing of the equipment is of a sub-polish stainless steel. It is required to clean regularly with soft cloth so as to keep a clean and polish surface. It is forbidden to clean the surface with a hard object, otherwise, the good looking appearance may be affected. It is also forbidden to wash it with water, otherwise, short circuit may occur in the electric control system and the equipment may be damaged.
3.It is required to check regularly the connection of various movement sections of the equipment to avoid loosen fasteners, otherwise, turnstile failure may be resulted due to long term operation.
4.It is required to apply lubricant regularly to the movement sections.
5.It is required to check regularly the connection socket and connectors of the lines to ensure a reliable connection.
6.It is required to check regularly the protection grounding of the system to ensure a reliable connection.
7.It is required to recover the protection housing of the circuit and close properly the cabinet door after checking and maintaining properly the product.
Certification
Factory Tour
Security flexible designer smart high quality 304 stainless steel tri-pod turnstile gate