Ads by Google
12 volt 125 amp battery charger power supply
Can be customized according to customer requirements
Specification:
12 volt 125 amp battery charger power supply
| AC input voltage range | Output voltage | Output current | Rated output power | Efficiency | Ripple / Noise |
| 100-240VAC | 5V | 2.5A | 15W | 82% | 100mV |
| 9V | 1.5A | 15W | 82% | 100mV | |
| 12V | 1.25A | 15W | 82% | 120mV | |
| 24V | 0.625A | 15W | 85% | 120mV | |
| 12V | 1A | 12W | 85% | 180mV |
Use IC solutions, very low standby power consumption, heat a small, high stability,Short circuit protection. overheat protection. all by the 100% full load burn.8-shaped interface, the inputSize: 75*40*50mm , Weight: 0.11KG.Operating temperature 0 °C ~ +50 °C.Storage temperature -20 °C ~ +85 °C
Packaging :
Inner package:poly bag,blister,white box
Outer package:carton Customized LOGO&design are acceptable
Delivery:
In general, we deliver goods within 7-15 days after the account’s reaching, and we usually choose DHL,UPS,TNT,EMS or Fed-Ex, of course, you can appoint another .
Picture details:
Quality Control:
6 full inspection:
1.Plug-in board full inspection : to make sure no components in wrong place, no reverse components, no components left, etc
2.Semi-finished products full inspection:to make sure no cold solder ,lack of components, no tin dross, no short-circuit, no open circuit, no bad led indicator ,no high voltage, no low voltage, no output, etc
3. Assembly full inspection: to make sure every unit with power ,without low voltage, without bad led indicator, low ripple, good appearance, with right cables, etc
4. Full inspection after burn-in: to make sure every unit with high temperature resistance, with power ,no bomb unit, no high voltage, no low voltage, no bad led indicator, etc
5. Finished products full inspection: to make sure every unit with power, no high voltage, no low voltage, no bad led indicator, low ripple, with right cables , no bad ultrasonic bonding, etc
6. Visual full inspection: to make sure no scratched case, no cracked wires ,no missing screw, no label misaligned, et
3 sampling inspection:
1. IQC (incoming quality control): According to AQL-MIL-STD-105E level II standard, to make sure raw materials up to international standard
2. IPQC (input process quality control): Tooling/fixture change or change over will do initial confirm,Position inspection will do per 2 hours. To make sure the whole production process under control, avoiding mistake in bulk.
3. OQC (outgoing quality control): According to AQL-MIL-STD-105E level II standard. To guarantee every unit in good quality before arrive at our customers.
12 volt 125 amp battery charger power supply