waterjet garnet sand garnet sand for waterjet cutting machine use 60#,80# ,100#,120#mesh packed in 25kg/bag

Waterjet garnet sand.

Abrasive garnet is used by waterjet cutting machines.

M60 provides good cutting power and speed, for waterjet cutting hard materials

while M80 waterjet abrasive provides both good speed and edge.

M100 and M120 grades are very fine grit and will yield high quality edges.

Common Characteristics of waterjet abrasive:

Bulk Density: about 140-150lb/ft3Hardness:     > 8.0 MohPurity:       > 80%

Grain sizes:

M60:

~40%       mesh 50     300 micron meter 30-40%     mesh 60     250 micorn meter ~10%       mesh 70     210 micorn meter

M80:

~10%       mesh  50    300 micron meter ~20%       mesh  60    250 micron meter 40-60%     mesh  80    180 micron meter ~20%       mesh 100    150 micron meter M100: ~10%       mesh  60    250 micron meter 10-20%     mesh  80    180 micron meter 50-60%     mesh 100    150 micron meter ~10%       mesh 120    125 micron meter M120: ~10%       mesh  80    180 micron meter ~20%       mesh 100    150 micron meter 50-60%     mesh 120    125 micron meter ~10%       mesh 140    106 micron meter

60# 80# 120# waterjet garnet sand