Ads by Google
Factory Advantages
1.Near to raw materials region,low labor costs,so lower production cost,competitive price,
2.Locate in the center of China,low and almost same transport costs to any China main port,
3.Advanced technique,
4.More than 10 years production experience,
5.Strict quality testing,good after-sale service,
6.ISO9001:2000 certificate,
7.Abundant export experience,
8.Accept OEM brand,
9.Small order is accepted,
10.Free samples to test quality.
Raw Materials
1.High hardness abrasive:ensure cutting sharp sex
2.High quality reinforced net:ensure the security of cutting machine
3.High quality adhesive resin:ensure good durable performance
Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.
Product:
| Size(mm) | Size(inch) | Shape | Description(A30#TBF) | Colour | Speed(r.p.m) | Speed(m/s) |
400x3.0x25.4
| 16x1/8x1 | flat | 1.Material:Aluminium oxide 2.Grit size:30#, 3.Hardness(1):T 4.Bonding agent:resin 5.Reinforced net:one or two fiberglass nets | Black | 3800 | 80 |
(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.
Feature:
1.Specially treated AO grain for extended life and fast cut,
2.Imported resin bonded makes our wheel stronger,
3.Two reinforced fiber glass nets makes our disc more strength,
4.Sharpness,more powerful capacity,
5.Extremely precise and straight cutting,
6.Won''t burn the work piece''s surface,
7.No vibration and no bouncing on work place,
8.Minimum cutting waste,because of small wheel thickness,reduce cutting dust and noise,
9.Lowest power consumption,outstanding service life.
Usage:
It is mainly used for cutting various metals and non-metals, cast iron,normal steel pipe,stick,screw steel,cast iron,etc.
2)the industry maybe use this wheel
1.machinery industry,
2.automobile industry,
3.shipbuilding industry,
4.metallurgy industry,
5.investment castings,
6.construction industry.
Domestic leading molding equipment:ensure the stability of the product performance
The process of checking the quality:
1.Check the cut off wheel's appearance:
Whether the cut off wheel has attrition on the surface
Whether the cut off wheel has concave point on the surface
2.Check the cut off wheel's diameter
3.Check the cut off wheel's thickness
4.Check the cut off wheel's aperture:25.4mm
5.Check the cut off wheel's cutting capacity
6.The workpiece after cutting
7.The cut off wheel's test report
| Size | Cutting Object | Cutoff Quantity | Efficiency SEC/cutoff | After Cutting Surplus |
| Φ350×3.0mm | 5×5×0.3cm angle iron | 5 | 5 | Φ349mm |
| Φ350×2.0mm | 5×5×0.3cm angle iron | 5 | 7 | Φ347mm |
| Φ300×2.0mm | 5×5×0.3cm angle iron | 5 | 6 | Φ297mm |
Install and use advice:
1.Do visually inspect all wheel before mounting for possible damage.
2.Do make sure operating speed of machine, does not exceed speed marked on wheel.
3.Do check mounting flanges for equal size,relieved as required and correct diameter.
4.Make sure workpiece is stable.Hold the tool so that the wheel is at a perpendicular angle to the workpiece being cut;
5.Keep a light touch, as the wheel will break under too much pressure. Do not bump the wheel to start a cut;
6.Feed the wheel through the work as fast as possible without slowing the wheel in the cutting.
Safety Recommendations:
1.Wear protective goggles;2.Wear protective gloves;3.Wear ear protectors;4.Wear dust respirators;5.Observe safety recommendations.
Packing:
1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.
2.During storage,put the wheels horizontally,donot touch the floor directly.
3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.
Dimensionmm | Dimensioninch | Speedr.p.m | Speedm/s | G.Weightkg | DimensionL*W*H(mm) | Box Qty | |
Piece/box | Piece/bigbox | ||||||
250x3.0x25.4 | 10x1/8x1 | 6100 | 80 | 10 | 260x90x260 | -- | 25 |
300x3.0x25.4 | 12x1/8x1 | 5100 | 80 | 13 | 310x90x310 | -- | 25 |
350x3.0x25.4 | 14x1/8x1 | 4400 | 80 | 18 | 360x90x360 | -- | 25 |
400x3.0x25.4 | 16x1/8x1 | 3800 | 80 | 24 | 410x90x410 | -- | 25 |
400x3.0x32 | 16x1/8x1 1/4 | 3800 | 80 | 23 | 410x90x410 | -- | 25 |
16" inch T41 Flat Metal Cut Off Wheel Disc For Stationary Saws