digital heating thermostat digital thermostat heating thermostat temperature controller room thermostat

Introduction

TKB 80.XXX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostatThe thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.

Application

For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...

  

Features

On/off control output for heating device Symbol indicator when heating is onTemperature limitation function for protecting the wooden floor Current room temperature displaying when the thermostat is switched-off “Key-lock” function for protecting the setted parameters (especially suitable for Public Places)

  

Technical data

Voltage: AC230V

Power consumption: 2WSwitching differential: ±0.5K

Setting range: 5°c~90°c

Limitation range: 4°c~99°c(factory setting: 28°c~32°c)Protective housing: IP20Housing material: anti-flammable PCFloor sensor: rubber-thermoplastic NTC sensor, cable length is 3m

Selection table

Model	Current	Application
TKB80.713	3A	For control of electric actuator or electro thermal actuator
TKB80.716	16A	For control of heating cable or other heating equipments